Industries
We supply mid-sized Tier 1 and Tier 2 suppliers: machine builders, vehicle and equipment suppliers first, and a set of specialist equipment niches where tolerance and documentation decide.
Core industries
Most of our work: everyday machined, sheet metal and welded parts, made to drawing and delivered with agreed documents.
Industrial & special machinery
Plates, housings, frames and welded bases for machine builders, from a single part to small series, often with drawing revisions between batches.
| Typical parts | Plates, housings, machine frames, welded bases |
|---|---|
| Materials | Structural steel S235 / S355, C45, Al 6082, 1.4301 |
| Processes | CNC milling, CNC turning, sheet metal, welded assemblies |
Automotive & commercial vehicles
Low- and mid-volume machined and sheet metal parts, fixtures and gauges for Tier 1 and Tier 2 suppliers, sourced in Bursa, one of Türkiye's main automotive manufacturing regions. Series safety parts that require IATF 16949 are outside what we offer.
| Typical parts | Brackets, housings, fixtures and gauges, commercial-vehicle parts |
|---|---|
| Materials | Steel, stainless, aluminium |
| Processes | CNC milling, CNC turning, sheet metal, welded assemblies |
Agricultural & construction machinery
Welded frames, brackets, pins, bushes and hydraulic blocks for agricultural, construction and off-highway equipment, primed or powder coated to your specification.
Guide: Welded frames for agricultural and construction machinery
| Typical parts | Welded frames, brackets, pins and bushes, hydraulic blocks |
|---|---|
| Materials | Structural steel S355, C45, 42CrMo4 |
| Processes | Welded assemblies, CNC turning, CNC milling, sheet metal |
Energy & electrical equipment
Copper busbars, sheet metal enclosures and machined parts for switchgear, power distribution and wind equipment. Main structural wind parts such as towers and blades are outside our scope.
| Typical parts | Copper busbars, enclosures and panels, machined brackets |
|---|---|
| Materials | Copper, aluminium, galvanised and stainless sheet |
| Processes | CNC milling, sheet metal, assembly & finishing |
Hydraulics & fluid power
Manifolds, valve blocks and turned parts for hydraulic and pneumatic systems. Cross-drilled ports are deburred and cleaned before shipping; pressure testing is agreed per drawing.
| Typical parts | Manifolds, valve blocks, fittings, turned parts |
|---|---|
| Materials | Steel C45 / 42CrMo4, Al 6082, brass |
| Processes | CNC milling, CNC turning |
Specialist niches
Equipment niches with tight tolerances, clean parts and paperwork that has to match the part.
Photonics & lasers
Optomechanical housings, mounts, baseplates and cooling plates for laser sources and optical subsystems, where flatness and a stable part decide.
| Typical parts | Optomechanical housings, mounts, baseplates, cooling plates |
|---|---|
| Materials | Al 6061 / 6082 / 7075, 1.4404, copper |
| Processes | CNC milling, CNC turning, assembly & finishing |
Robotics & automation
Joint housings, gripper parts and frames for automation builders, often in small series with several revisions.
| Typical parts | Joint housings, gripper parts, frames, small series |
|---|---|
| Materials | Al 6061 / 7075, C45, 42CrMo4, 1.4301 |
| Processes | CNC milling, CNC turning, sheet metal, welded assemblies |
Vacuum & semiconductor equipment (non-litho)
Chambers, flanges and fixtures for process and inspection equipment. Tolerances and surface requirements are confirmed against your drawing before the order.
| Typical parts | Chambers, flanges, fixtures |
|---|---|
| Materials | Stainless 1.4301 / 1.4404, Al 6061 |
| Processes | CNC milling, CNC turning, welded assemblies |
Research, cryogenics & quantum
Cryostat and beamline parts for research groups and the instrument builders who supply them, made to your drawing.
| Typical parts | Cryostat parts, beamline parts |
|---|---|
| Materials | Copper, brass, stainless 1.4301 / 1.4404, Al 6061 |
| Processes | CNC milling, CNC turning, assembly & finishing |
Test, measurement & lab
Frames and precision parts for test benches, measuring instruments and laboratory equipment.
| Typical parts | Instrument frames, precision parts |
|---|---|
| Materials | Al 6061 / 6082, stainless 1.4301, C45 |
| Processes | CNC milling, CNC turning, sheet metal |
Data-center cooling & power
Welded manifolds, frames and enclosures for cooling and power equipment. These drawings turn on weld qualification and leak-tested assemblies.
| Typical parts | Welded manifolds, frames, enclosures |
|---|---|
| Materials | Stainless 1.4301 / 1.4404, steel, aluminium sheet |
| Processes | Welded assemblies, sheet metal, CNC milling |
| Verification | Weld qualification, leak test |
We do not supply defence or military programmes.