Machined parts for photonics and laser systems
Housings, mounts, baseplates and cooling plates for suppliers who build laser sources, optical subsystems and photonics instruments. Made in our audited network in Bursa, to your drawing.
| Industry | Photonics & lasers |
|---|---|
| Typical parts | Housings, mounts, baseplates, cooling plates |
| Materials | Al 6061 / 7075, 1.4404, Cu |
| Key requirements | Flatness, stability, black anodizing |
| Contact | sales@ertas.engineering |
Parts we quote for photonics suppliers
Typical parts and what the drawing usually asks for. Your drawing decides; this is where we usually start.
| Part | Typical material | Process | What the drawing usually asks for |
|---|---|---|---|
| Optomechanical housings | Al 6061 / 6082 / 7075 | CNC milling 3/5-axis | Flatness of mounting faces, stress relief before finish machining, black anodizing |
| Lens and mirror mounts | Al 6061 / 7075, 1.4404, Invar on request | CNC milling, CNC turning | Tight bore and seat tolerances, burr-free and clean, black anodizing where light scatters |
| Baseplates and breadboards | Al 6061 / 6082 | CNC milling | Flatness over the full face, stress relief, measurement report for flatness |
| Water-cooling plates | Copper, Al 6061 | CNC milling, assembly | Flat contact face, clean channels, documented material (EN 10204 3.1) |
| Enclosure panels | Al sheet, 1.4404 | Sheet metal, finishing | Burr-free edges, consistent finish, black anodizing on inner faces |
| Small sub-assemblies | Mixed, per drawing | Assembly & finishing | Fit check against the drawing, clean handling, measurement report for critical features |
Materials: EN AW-6061/6082/7075, stainless 1.4404, copper. Invar on request.
What we check before parts leave
The points photonics drawings usually call out, checked against your drawing.
- Flatness of mounting facesMeasured on the faces that carry optics, and reported when the drawing calls it a critical feature.
- Stability after machiningStress relief before finish machining, so the part holds its shape once it is clamped and loaded.
- Surface and stray lightBlack anodizing checked for an even, matt finish on the faces that see light.
- Burr-free and cleanEdges, bores and threads checked for burrs and chips. Parts leave clean and packed.
- Material on paperMaterial documented to EN 10204 3.1 and matched to the grade on your drawing.
- Critical dimensionsA measurement report for the features you mark, delivered with the parts.
Export controlItems specially designed for high-power lasers can be dual-use controlled. We ask for your classification before quoting and do not ship controlled items without the required licences.
Guides
Short references we use ourselves when reviewing a drawing.
Other industries
Same network, same documents, different drawings.
Industrial & special machineryPlates, housings, frames, welded basesAutomotive & commercial vehiclesLow- and mid-volume parts, fixtures and gaugesAgricultural & construction machineryWelded frames, brackets, pins, hydraulic blocksEnergy & electrical equipmentCopper busbars, enclosures, machined bracketsHydraulics & fluid powerManifolds, valve blocks, turned partsRobotics & automationJoint housings, grippers, frames in small seriesVacuum & semiconductor equipmentChambers, flanges, fixtures (non-litho)Research, cryogenics & quantumCryostat and beamline partsTest, measurement & labInstrument frames and precision partsData-center cooling & powerWelded manifolds, frames, enclosures
Send the drawing
Attach the drawing, the quantity and your export classification. You get a route, a price and a lead time back.
| Supplier | Ertaş Engineering |
|---|---|
| Industry | Photonics & lasers |
| Send | Drawing, quantity, export classification |
| Contact | sales@ertas.engineering |