Manifolds, valve blocks and turned parts for hydraulics and fluid power

Manifolds, valve blocks and turned parts for hydraulic and pneumatic systems. Cross-drilled ports are deburred and cleaned before shipping; pressure testing is agreed per drawing. Made in our audited network in Bursa, to your drawing.

Email a drawing
Turned steel shaft with stepped diameters, a threaded end, a keyway and grooves
IndustryHydraulics & fluid power
Typical partsManifolds, valve blocks, fittings, turned parts
MaterialsC45 / 42CrMo4, Al 6082, brass
Key requirementsPort positions, burr-free cross bores, cleanliness
Contactsales@ertas.engineering

Parts we quote for hydraulics suppliers

Typical parts and what the drawing usually asks for. Your drawing decides; this is where we usually start.

PartTypical materialProcessWhat the drawing usually asks for
ManifoldsC45, Al 6082CNC millingPort positions, cross-drilled channels, cavity forms for cartridge valves
Valve blocksC45, 42CrMo4CNC millingValve cavities, sealing faces, port threads
Fittings and adaptersC45, brassCNC turningPort threads, sealing faces, surface finish
Turned parts: pistons, rods, sleeves42CrMo4, C45CNC turningDiameter fits, surface finish on sealing and running faces

Materials: steel C45 / 42CrMo4, EN AW-6082, brass.

What we check before parts leave

The points hydraulics drawings usually call out, checked against your drawing.

  1. Deburred cross boresIntersections of cross-drilled ports deburred before shipping.
  2. CleanlinessChannels and ports cleaned and the openings closed before packing.
  3. Pressure testPressure testing agreed per drawing, with the test pressure stated on the order.
  4. Ports and threadsPort positions and threads checked against the drawing.
  5. Material on paperMaterial documented to EN 10204 3.1 and matched to the grade on your drawing.
  6. Critical dimensionsA measurement report for the features you mark, delivered with the parts.

Guides

Short references we use ourselves when reviewing a drawing.

Hydraulic manifolds and valve blocks: machining, cleanliness, pressure testingGuide
Design for turned parts: rules for CNC turning and mill-turnGuide
Inspection reports for machined parts: CMM, measurement uncertainty, CpkGuide

Other industries

Same network, same documents, different drawings.

Industrial & special machineryPlates, housings, frames, welded basesAutomotive & commercial vehiclesLow- and mid-volume parts, fixtures and gaugesAgricultural & construction machineryWelded frames, brackets, pins, hydraulic blocksEnergy & electrical equipmentCopper busbars, enclosures, machined bracketsPhotonics & lasersHousings, mounts, baseplates, cooling platesRobotics & automationJoint housings, grippers, frames in small seriesVacuum & semiconductor equipmentChambers, flanges, fixtures (non-litho)Research, cryogenics & quantumCryostat and beamline partsTest, measurement & labInstrument frames and precision partsData-center cooling & powerWelded manifolds, frames, enclosures

Send the drawing

Attach the drawing, the quantity and any cleanliness or pressure-test requirement. You get a route, a price and a lead time back.

SupplierErtaş Engineering
IndustryHydraulics & fluid power
SendDrawing, quantity, cleanliness and test requirements
Contactsales@ertas.engineering