Welded frames and machined parts for agricultural and construction machinery
Welded frames, brackets, pins, bushes and hydraulic blocks for agricultural, construction and off-highway equipment, primed or powder coated to your specification. Made in our audited network in Bursa, to your drawing.
| Industry | Agricultural & construction machinery |
|---|---|
| Typical parts | Welded frames, brackets, pins and bushes, hydraulic blocks |
| Materials | S355, C45, 42CrMo4 |
| Finish | Primed or powder coated to your specification |
| Contact | sales@ertas.engineering |
Parts we quote for equipment builders
Typical parts and what the drawing usually asks for. Your drawing decides; this is where we usually start.
| Part | Typical material | Process | What the drawing usually asks for |
|---|---|---|---|
| Welded frames and sub-frames | S355 | Welded assemblies, CNC milling | Weld quality level, machining of mounting faces and bores after welding |
| Brackets and mounting plates | S355 | Sheet metal, welded assemblies | Hole positions, bend dimensions, primer or powder coating |
| Pins and bushes | C45, 42CrMo4 | CNC turning | Diameter fits, heat treatment to the drawing, surface finish |
| Hydraulic blocks | C45, 42CrMo4 | CNC milling | Port positions and threads, deburred cross-drilled holes |
| Covers and guards | Steel sheet | Sheet metal | Bend dimensions, burr-free edges, coating to your specification |
Materials: structural steel S355, C45, 42CrMo4.
What we check before parts leave
The points equipment drawings usually call out, checked against your drawing.
- Weld qualityWelds inspected visually against the quality level on your drawing.
- Frame geometryMounting points and bores on welded frames measured after welding and machining.
- Heat treatmentHeat treatment of pins and bushes documented when the drawing specifies it.
- CoatingPrimer or powder coat checked against your specification before packing.
- Material on paperMaterial documented to EN 10204 3.1 and matched to the grade on your drawing.
- Critical dimensionsA measurement report for the features you mark, delivered with the parts.
Guides
Short references we use ourselves when reviewing a drawing.
Other industries
Same network, same documents, different drawings.
Industrial & special machineryPlates, housings, frames, welded basesAutomotive & commercial vehiclesLow- and mid-volume parts, fixtures and gaugesEnergy & electrical equipmentCopper busbars, enclosures, machined bracketsHydraulics & fluid powerManifolds, valve blocks, turned partsPhotonics & lasersHousings, mounts, baseplates, cooling platesRobotics & automationJoint housings, grippers, frames in small seriesVacuum & semiconductor equipmentChambers, flanges, fixtures (non-litho)Research, cryogenics & quantumCryostat and beamline partsTest, measurement & labInstrument frames and precision partsData-center cooling & powerWelded manifolds, frames, enclosures
Send the drawing
Attach the drawing, the quantity and your coating specification. You get a route, a price and a lead time back.
| Supplier | Ertaş Engineering |
|---|---|
| Industry | Agricultural & construction machinery |
| Send | Drawing, quantity, coating specification |
| Contact | sales@ertas.engineering |