Machined parts for research, cryogenics and quantum
Cryostat and beamline parts for research groups and the instrument builders who supply them, made to your drawing. Made in our audited network in Bursa.
| Industry | Research, cryogenics & quantum |
|---|---|
| Typical parts | Cryostat parts, beamline parts |
| Materials | Cu, brass, 1.4301 / 1.4404, Al 6061 |
| Key requirements | Material grade, sealing faces, clean parts |
| Contact | sales@ertas.engineering |
Parts we quote for research and instrument builders
Typical parts and what the drawing usually asks for. Your drawing decides; this is where we usually start.
| Part | Typical material | Process | What the drawing usually asks for |
|---|---|---|---|
| Cryostat flanges and plates | 1.4301 / 1.4404, Al 6061 | CNC turning, CNC milling | Sealing faces, flatness, hole patterns to the drawing |
| Copper plates and thermal links | Copper | CNC milling | Flat contact faces, clean surfaces, documented copper grade |
| Turned parts and fittings | Brass, 1.4404 | CNC turning | Thread quality, sealing faces, burr-free bores |
| Beamline supports and brackets | 1.4301, Al 6061 | CNC milling | Position of mounting holes, flat reference faces |
| Small sub-assemblies | Mixed, per drawing | Assembly & finishing | Fit check against the drawing, clean handling, measurement report for critical features |
Materials: copper, brass, stainless 1.4301/1.4404, EN AW-6061.
What we check before parts leave
The points cryostat and beamline drawings usually call out, checked against your drawing.
- Material gradeMaterial documented to EN 10204 3.1 and matched to the grade on your drawing, since behaviour at low temperature depends on it.
- Sealing facesSealing faces checked for scratches and for the roughness on the drawing.
- Contact facesFlatness of copper contact faces measured, and reported when the drawing calls it a critical feature.
- Cleaning and packingCleaning and packing are agreed per drawing before the order.
- Burr-freeEdges, bores and threads checked for burrs and chips.
- Critical dimensionsA measurement report for the features you mark, delivered with the parts.
Export controlSome cryogenic and quantum equipment, and items specially designed for it, can be dual-use controlled. We ask for your classification before quoting and do not ship controlled items without the required licences.
Guides
Short references we use ourselves when reviewing a drawing.
Other industries
Same network, same documents, different drawings.
Industrial & special machineryPlates, housings, frames, welded basesAutomotive & commercial vehiclesLow- and mid-volume parts, fixtures and gaugesAgricultural & construction machineryWelded frames, brackets, pins, hydraulic blocksEnergy & electrical equipmentCopper busbars, enclosures, machined bracketsHydraulics & fluid powerManifolds, valve blocks, turned partsPhotonics & lasersHousings, mounts, baseplates, cooling platesRobotics & automationJoint housings, grippers, frames in small seriesVacuum & semiconductor equipmentChambers, flanges, fixtures (non-litho)Test, measurement & labInstrument frames and precision partsData-center cooling & powerWelded manifolds, frames, enclosures
Send the drawing
Attach the drawing, the quantity and your export classification. You get a route, a price and a lead time back.
| Supplier | Ertaş Engineering |
|---|---|
| Industry | Research, cryogenics & quantum |
| Send | Drawing, quantity, export classification |
| Contact | sales@ertas.engineering |